Capacitors order list for Tandberg Huldra 10
--------------------------------------------
All capacitor are electrolytic type unless noted.

I like to keep as many original components as possible. But
for safety reason and possibly being those caps that had most 
stress through nearly 50 years I replace all electrolytic caps
on power supply and power amp except the input coupling caps 
which are some special selected types compared to power rail 
caps with identical value.

I'm unsure all 2.2µF used to block DC on inputs on each module 
truly are tantal type. Dielectric are unknown and it might be 
better to call them drop capacitor. They do have similar mushroom 
shape and dipping process into liquid insolation layer as typical 
tantal does. Anyway, they are part of the sound and we better 
keep the originals if possible. If replaced try film capacitors.

NOTE: Several 22µF values have 47µF mounted on PCB on newer 
      revision without schematic being changed.

Power Supply  #41150
	C1006 - 4700µF  70V (*) 
	C1005 -  220µF  50V 
	C1004 -   10uF 100V (35V)
	C1003 -   22uF  40V (47µF original on PCB)
	C1001 -  100µF  50V (feed stereo indicator bulb)(**) 
	*  rectifier and fuse seem to hold if increased to 
	   10.000µF which give better ripple measurement 
	   and bass performance
	** Tantal on PCB but not on schematic parts list 

Power Amp  #41115  takes 61V from PSU
	C725  -  470µF  63V possible has to do with power mute circuit
	
	Left:
	C701  -   22µF  63V input signal
	C705  -   22µF  63V
	C707  -   47µF 100V
	C709  -  250µF  40V
	C719  - 4700µF  70V* 
	* manual list 40V as minimum voltage for this cap
	  later H10 have 3300µF same as TR-1000
  
	Right:
	C702  -   22µF  63V input signal
	C706  -   22µF  63V
	C708  -   47µF 100V 
	C710  -  250µF  40V 
	C720  - 4700µF  70V
	* manual list 40V as minimum voltage for this cap
	  later H10 have 3300µF same as TR-1000

RIIA AMP  #41201  35V
	Left:
	C503  -   10µF  25V
	C511  -  100µF  25V
	C513  -  100µF  25V
	
	Right:
	C504  -   10µF  25V
	C512  -  100µF  25V
	C514  -  100µF  25V

RF Board #41160  35V
	Left:
	C551  -   2.2µF  35V input signal - Tantal
	C555  -    50µF  40V
	C557  -    10µF  25V

	Right:
	C552  -   2.2µF  35V input signal - Tantal
	C556  -    50µF  40V
	C558  -    10µF  25V

PreAmp  #41150  35V
	Left:
	C605  -   2.2µF 100V signal
	C609  -    10µF 100V signal
	C621  -    10µF 100V signal
	C623  -   2.2µF 100V signal - Tantal
	C625  -    50µF  40V
	C635  -   2.2µF  35V signal - Tantal
	C637  -   100µF  25V signal
	
	Right:
	C606  -   2.2µF 100V signal
	C610  -    10µF 100V signal
	C622  -    10µF 100V signal
	C624  -   2.2µF 100V signal - Tantal
	C626  -    50µF  40V
	C636  -   2.2µF  35V signal - Tantal
	C638  -   100µF  25V signal