TO CHANGE A SOUND -- mrk-II rev01 1) Enter programme mode 2) Select channel 3) Alter/update function 1) TO ENTER PROGRAMME MODE Press PROG. The program LED will light. 2) TO SELECT A CHANNEL TO PROGRAM Hold down PROG and press one of the buttons labeled 1-12. Program light on selected channel will flash. 3a) TO ALTER A FUNCTION Press any of the fifteen functions, its light will stay on and its current value will be displayed. Use the incrementor to change the value as required. 3b) TO SELECT ANOTHER FUNCTION Press the desired button, its light will stay on and its current value will be displayed. Value from the last edit are automatically stored. You can carry on around this loop, selecting and changing function values. All the changes that you are making are entered into the selected kit memory. If you like to build on an existing kit but still keep the original you first have to copy the kit to a new location. If you want to ignore your changes hold PROG and push MOD SPEED. This will restore the complete kit as it where when first selected. To delete only last edit, hold PROG and push NOISE. NOTE: Temporary buffer are deleted when kit change. To exit from program mode, press PROG, the corresponding lights will go off.